Accurate temperature probes with Pt1000/3850ppm sensor without any connector
For temperature transducers, temeperature recorders T-Print and monitoring system MSx
Unless otherwise indicated probes use sensor tolerance
t=±(0.15+0.002*|t|)
- class A in accordance with IEC751.
|
|
|
|
Brass surface probe with cable of specified length, range from -30 to +200°C. Diameter 18mm, width 6.5mm. Mounting
by a M4 srew or fixing by a self adhesive tape. Cable lengths 1,2,5 or 10 meters
available. Probe is not resistant against moisture. |
Multi purpose probe -30 to +150°C with 1 meter cable. Probe is not resistant against
moisture. |
Hand held pointed tip probe -30 to +220°C with 1 meter cable. Probe is not resistant
against moisture. Time response t63<10s, t95<30s, measured in fluid. |
Hand-held pointed tip probe -30 to +200°C, stainless steel 17241 for food industry with
teflon handle and silicon cable 1 meter, IP67. Time response t63<7s, t95<15s,
measured in fluid. |
type 2091-200/0 - cable with tin coated wires |
Special pointed tip probe -30 to +80°C for food industry, stainless steel 17240 with silicon cable 1 meter. Protection IP67. For temperature measurement of the inside of frozen food. type 2071-80/0 - cable with tin coated wires |
Food industry probe -30 to +200°C for temperature measurement of fluids and gases, stainless steel 17240. Protection IP67. Ambient temperature near the head -30 to +100°C. Available also with connection cable with connector Lumberg RKT, length 5m. type PTS380K/0 - cable with tin coated wires |
Surface probe for tubing and flat surface, range from -30 to +130°C, 2 meters cable,
IP65 |