Temperature probes with thermocouple K (NiCr-Ni) for data loggers MS5D, MS5
Measuring end is uninsulated weld of both wires.
Conductors are separately insulated and overall with another insulation.
Connection end - uninsulated wires for connection to data logger MS5D, MS5 input terminals.
Thermocouple tolerance : class 1 according to IEC584-2 +/-1.5°C or +/-0.004 x t (which is higher)
|
Type GD 260/0 -65 to +260°C extremely fast response wire probe, teflon insulated, outer cross section 0,5 x 0,8 mm. |
|
Type GD 700/0 -65 to +700°C duplex insulated - high temperature glass, outer cross section 1,4 x 2,3 mm. |
|
Type GD 1250/0 -65 to +980°C duplex insulated - Silica fibre, outer cross section 2,7 x 3,9 mm. |
|
SNP03/0 - Extension cable for type K thermocouples up to +200°C, outer cross section 1,7 x 3,0 mm. Available in lengths 1 to 15 m. Conductors are separately FEP insulated and overall with another FEP insulation. Connection end - uninsulated wires for connection to data logger MS5D, MS5 input terminals, oposite side - subminiature female connector for K thermocouple. Any K thermocouple probe with subminature male connector is connectable to the extension cable. Available probes. |
|
Subminiature male and female connectors for thermocouples J, K, S up to +200°C. Please specify the thermocouple type. |
|
SNP04 - Selfadhesive labels 25x40 mm for fixing the wire probe to the surface, temperature -70 to 260°C, set of 20 pieces. |